The short answer: a power dialer calls one number at a time, only when the rep is free. A predictive dialer dials ahead for a whole team, betting on when an agent will become available. The first never creates abandoned calls, the second is faster but does create them. For the vast majority of SMBs, the power dialer is the right choice.
I'm Benoit. Here I explain the four auto dialer modes (preview, power, parallel and predictive), with a comparison table, the French legal framework and my advice based on your team size. My analysis is based on the vendors' public documentation and on the pages of the French authorities DGCCRF, Arcep and CNIL.
Disclosure: some links on this page are affiliate links. If you sign up through them, I may earn a commission at no extra cost to you. Information about the tools comes from their official pages, checked on October 7, 2026.
⏱️ The 30-second summary
- 👀 Preview dialer: the record shows up, the rep decides when to call. The slowest, the most qualitative.
- 📞 Power dialer (or progressive dialer): one call after another, automatically. Zero abandoned calls. The right balance for an SMB.
- ⚡ Parallel dialer: several numbers at once for a single rep. Ideal for high-volume cold calling.
- 🏢 Predictive dialer: an algorithm dials for a whole team. Meant for call centers, with a risk of abandoned calls.
The 4 auto dialer modes explained simply
All these tools are dialers, or auto dialers: they eliminate the time wasted typing numbers. What sets them apart is who decides to start the call and how many numbers are dialed at the same time. If you're new to the topic, my guide what is an auto dialer covers the basics.
1. The preview dialer: the rep stays in control
With a preview dialer, the tool shows the next contact's record (history, notes, company) and the rep starts the call when they're ready. They can also skip to the next contact. It's the slowest mode, but it gives you time to prepare each conversation.
It suits complex sales and strategic accounts. CloudTalk and RingCentral RingCX offer it.
2. The power dialer (or progressive dialer): one call after another
The power dialer automatically dials the next number as soon as the previous call ends or goes unanswered. A single line, one call at a time, and a rep who's always available when someone picks up. The term progressive dialer refers to the same principle: RingCentral actually states that RingCX power dialing runs through its progressive mode.
This is Ringover's mode: Ringover recommends it for teams of fewer than 6 reps and up to 70 calls per hour, with lists of up to 300 contacts and adjustable wrap-up time between calls. Skipcall, CloudTalk and Aircall also offer a power dialer. Skipcall claims 60 to 80 calls per hour with the power dialer, versus 20 to 25 manually (vendor figures, to be taken as a ballpark).
3. The parallel dialer: several lines for a single rep
The parallel dialer calls several numbers at the same time for a single rep. The first contact who picks up is connected to them, the other lines are dropped.
- Skipcall: 1 to 4 lines with a single setting, included from the Starter plan. Dialing only starts if a rep is free, which avoids abandoned calls. The vendor claims 150 to 200 calls per hour.
- CloudTalk: 2 to 10 lines as an add-on (€39 per user per month). If no agent is free, the algorithm slows down dialing to avoid abandoned calls.
- Ringover: a 2-line parallel dialer exists as an add-on, but only in the United States, Spain and the United Kingdom so far, not in France.
4. The predictive dialer: the algorithm dials for the whole team
The predictive dialer goes one step further. It statistically calculates when a team's agents will become free and starts calls before an agent is available. RingCentral sums it up this way: predictive dialing calls a number before an agent is necessarily free.
The direct consequence: if a contact picks up and no agent is available, the call is abandoned. That's the price of speed. Kavkom presents its predictive dialer as the opposite of a sequential power dialer, with voicemail and unassigned number detection, as an add-on from €50 excl. VAT per user per month billed annually. RingCentral RingCX offers preview, progressive and predictive modes in a full contact center, from $65 per agent per month billed annually.
Comparison table: preview, power, parallel and predictive dialer
| Criteria | 👀 Preview | 📞 Power / progressive | ⚡ Parallel | 🏢 Predictive |
|---|---|---|---|---|
| Who starts the call | The rep, every time | The tool, one by one | The tool, several at once | The algorithm, for the team |
| 🚀 Speed | Slow | Fast (60 to 80 calls/h according to Skipcall) | Very fast (150 to 200 calls/h according to Skipcall) | Very fast, at team scale |
| 📵 Abandoned calls | None | None | None if the tool only dials for a free rep | Yes, by design |
| 👥 Suitable team size | Any, complex sales | About 1 to 10 reps | High-volume SDRs and BDRs | Call centers, dozens of agents |
| 🎯 Conversation quality | Maximum | Good (record shown on pick-up) | Fair, little preparation | Variable |
| 🧰 Example tools | CloudTalk, RingCX | Ringover, Skipcall, CloudTalk, Aircall | Skipcall (4 lines), CloudTalk (10 lines as an option) | Kavkom, RingCX |
| Try the Ringover power dialer | See Skipcall | See Kavkom | ||
The paces are figures advertised by the vendors, not independent measurements. The "team size" row is my own assessment based on the tools' documentation.
Power dialer or predictive dialer: which mode for which use case?
- Following up with customers or inbound leads: preview or power dialer. Every conversation counts, an abandoned call would be a waste.
- Prospecting SMBs in B2B with a small team: power dialer. You save dialing time, and the CRM record shows up on pick-up.
- Mass cold calling on cold lists: parallel dialer. When few contacts pick up, dialing 3 or 4 numbers at once changes the pace.
- Call center with dozens of agents: predictive dialer, provided you control the abandoned call rate and the legal framework.
What the official sources say in France
Here's what I found on the official French pages, quoting their wording (my translation). These rules apply in France: if you call from or into another country, check the local rules with a lawyer in that country.
Numbers displayed by an auto dialer (Arcep)
Arcep, the French telecom regulator, defines automated calling systems as "systems designed to call or send messages to several end users automatically, generally simultaneously and on a large scale". Since January 1, 2023, using numbers starting with 01 to 05, 06-07 and 09 for these systems has been prohibited in France: dedicated numbers are provided (0162, 0163, 0270, 0271, 0377, 0378, 0424, 0425, 0568, 0569, 0948 and 0949). Arcep excludes from this category calls made "individually, with no possible parallelization and on the explicit command of a human for each call" (source: Arcep, numbering plan for professionals).
My cautious reading: a preview dialer, where the rep triggers each call, seems to fit this case. A power, parallel or predictive dialer, which dials without a human click, should be reviewed with your carrier to know which number to display.
Abandoned calls
On the Arcep pages I checked, I didn't find a numerical rule on the abandoned call rate. Ringover states in the FAQ of its power dialer page that Arcep strictly regulates predictive dialers. If you're considering a predictive dialer, ask the vendor and your legal advisor the exact question.
Telemarketing to consumers (DGCCRF)
In France, since August 11, 2026, telemarketing calls to a consumer are prohibited without their prior consent (source: DGCCRF). Calls are limited to Monday through Friday, excluding public holidays, 10 a.m. to 1 p.m. and 2 p.m. to 8 p.m., and to 4 calls per consumer over 30 days. An important point for fast modes: the DGCCRF specifies that the limit applies "to all calls or call attempts (voicemail, missed call,...)" (source: DGCCRF FAQ for professionals). So an abandoned call counts. The same FAQ states that these rules only target prospecting to consumers, not calls between businesses.
B2B prospecting (CNIL)
In B2B, the CNIL (the French data protection authority) states that prospecting can rely on legitimate interest when the solicitation relates to the person's profession. The person must be informed and able to object simply and free of charge, and each call must make it possible to identify the organization calling (source: CNIL). For prospecting individuals with an automated calling system, the CNIL requires prior consent (source: CNIL).
These points summarize official French sources, they're not legal advice: have your prospecting process validated by a lawyer before launching your campaigns, and outside France, check your own country's rules with a lawyer.
Which one should you choose based on your team size?
🏆 3 to 10 reps
Power dialer built into the phone system. Ringover BUSINESS: €141 excl. VAT per month for 3 users billed annually, calls included.
See the Ringover offer →Why a power dialer suits most SMBs
The predictive dialer was designed for floors of dozens of agents. With just a few reps, the algorithm has little room to anticipate, and every abandoned call hurts your image with a prospect. A power dialer guarantees that a person answers every pick-up.
Here's why I recommend Ringover for this profile:
- Power dialer included from BUSINESS (€47 excl. VAT per user per month billed annually), with numbers in 65 countries and unlimited calls to 110+ destinations.
- A real phone system: call routing, IVR, SMS, and the option to pause the session to take an inbound call.
- 100+ integrations, including HubSpot, Salesforce, Pipedrive and Zoho.
- French vendor, ISO 27001 certified, 4.7/5 from 890 Capterra reviews.
Its limits, to be thorough: a single line, 300 contacts per list, 3 licenses minimum, and a €0.08 per minute surcharge mentioned on the pricing page for calls made through an auto dialer, whose scope should be clarified before you sign. Everything is detailed in my full Ringover review. If multi-line dialing is your priority, read my reviews of Skipcall and CloudTalk; for predictive dialing, my Kavkom dialer review. Pricing for all these tools is in my power dialer pricing comparison, and the full ranking in my best power dialer comparison.
My verdict: power dialer or predictive dialer?
If you run an SMB or a sales team of fewer than 10 people, choose a power dialer: it's fast, easy to manage and has no abandoned calls. Move to a parallel dialer only if your job is to run through hundreds of cold calls. Keep the predictive dialer for structured call centers, with legal support.
🏆 The power dialer I recommend: Ringover Power dialer, business phone system, SMS and AI in the same subscription. French vendor, 4.7/5 on Capterra. Try Ringover free for 7 days → ✅ 5 users • 5 hours of outbound calls • €5 credit includedFrequently asked questions
What's the difference between a power dialer and a predictive dialer?
A power dialer calls one number at a time, only when the rep is available: there are never any abandoned calls. A predictive dialer dials ahead for a whole team by anticipating when calls will end. It's faster but creates abandoned calls when a contact picks up and no agent is free.
Power dialer or predictive dialer: which one should you choose?
For an SMB or a team of fewer than 10 reps, the power dialer is the best choice: simple, fast and with no abandoned calls. The predictive dialer is designed for call centers with dozens of agents.
What is a parallel dialer?
A parallel dialer calls several numbers at the same time for a single rep and connects them to the first contact who picks up. Skipcall offers up to 4 lines from its Starter plan, CloudTalk 2 to 10 lines as a €39 per user per month add-on.
What is a progressive dialer?
A progressive dialer automatically calls the next number as soon as the agent finishes their call. It's the same principle as a power dialer: one call at a time, with no abandoned calls.
What is a preview dialer?
A preview dialer shows the contact's record before the call and lets the rep start the call when they're ready. It's the slowest mode, suited to complex sales. CloudTalk and RingCentral RingCX offer it.
How much does a predictive dialer cost?
With Kavkom, the predictive dialer is an add-on from €50 excl. VAT per user per month billed annually, on top of a telephony plan. RingCentral RingCX, which includes preview, progressive and predictive modes, starts at $65 per agent per month billed annually.
Is a predictive dialer legal in France?
I didn't find any text banning it as such, but it's regulated. In France, since August 11, 2026, telemarketing to consumers requires their prior consent, and every call attempt counts toward the limit of 4 calls over 30 days. Arcep also prohibits automated calling systems from using numbers starting with 01 to 05, 06-07 and 09. Have your use validated by a lawyer, and outside France, check your own country's rules with a lawyer.